How to reset or factory restore Innostream INNO A20 device?
Innostream INNO A20 is a device used in digital audio processing, which provides a range of audio encoding and decoding options. To reset or factory restore the INNO A20 device, you can follow the below-given methods:
Method 1: Resetting the Device using the Power Button
1. Turn off the device by pulling out the power cable from the back of the device.
2. Wait for a few seconds to ensure that the device has completely turned off.
3. Press and hold the power button on the back of the device until the LED light on the front of the device starts flashing.
4. Continue holding the power button until the flashing stops, and the device turns off.
5. Wait for a few seconds, and then turn the device back On. The device will have been reset, and all settings will be restored to their default values.
Method 2: Resetting the Device using a Computer
1. Connect the INNO A20 device to a computer using a USB cable.
2. Download and install the INNO A20 software from the Innostream website.
3. Open the INNO A20 software, and then select the option to update the device.
4. Follow the on-screen instructions to update the device. During the update process, the device will be reset to its default values.
5. Disconnect the device from the computer, and then turn the device back On. All settings will be restored to their default values.
Method 3: Resetting the Device using the DIP Switch
1. Locate the DIP switch, which is usually located at the back of the device.
2. Turn off the device by removing the power cable from the back of the device.
3. Press and hold the DIP switch down for around 10 seconds, and then release it.
4. Turn the device back On, and wait for the device to start up. The device will have been reset to its default values.
It is recommended to use Method 2, which involves resetting the device using a computer, as it ensures that all settings are restored to their default values and also provides a backup option to store settings before resetting the device.Method 1 and 3 are only useful for temporarily resetting the device if there is no software to reset it.
