How to reset or factory restore Innostream INNO 50 device?
The INNO 50 device, also known as a modem, is designed to provide broadband internet connectivity to households and businesses. In case of any software glitches, hardware malfunctions, or other issues that prevent the device from functioning properly, it can be reset or factory restored to its original state. Here are the most common and recommended ways to reset or factory restore an INNO 50 device:
Method 1: Using the Reset Button
The first and most straightforward way to reset an INNO 50 device is by using the reset button located at the back of the modem. Here's how to do it:
1. Unplug the modem from the power source.
2. Press and hold the reset button for 10-15 seconds. Keep pressing the button while the modem is unplugged.
3. After the reset button is pressed for the required duration, plug the modem back into the power source.
4. Wait for the modem to fully restart.
5. Check the modem's LCD display to verify that the reset was successful. If the reset was successful, the modem will display the manufacturer's logo or a message indicating that it has been reset to its default settings.
Method 2: Using the Web Interface
Another way to reset an INNO 50 device is by using the modem's web interface. Here's how to do it:
1. Open a web browser on a device that is connected to the modem network (via Ethernet or Wi-Fi).
2. Type the following IP address in the address bar: 192.168.1.1
3. Enter the default username (usually "admin") and password (usually "password") when prompted. If you don't know the default login details, you can check the modem's user manual or contact the modem's manufacturer.
4. Once you are logged into the modem's web interface, navigate to the "Maintenance" or "Backup/Restore" section it's usually located under "Settings".
5. Look for a list of backup files and select the "Restore" option next to the backup file that you want to restore. If you don't have any backup files, you can create a new one by selecting the "Create Backup" option.
6. Follow the on-screen instructions to restore the modem to its default settings. This may involve selecting a firmware version and entering any required passwords.
7. Wait for the modem to fully restart.
8. Check the modem's LCD display to verify that the reset was successful. If the reset was successful, the modem will display the manufacturer's logo or a message indicating that it has been reset to its default settings.
Method 3: Using the Modem's Serial Port
The third and final way to reset an INNO 50 device is by using the modem's serial port. Here's how to do it:
1. Connect a computer to the modem's serial port using a serial cable.
2. Open a serial terminal program on the computer (such as HyperTerminal or Minicom).
3. Set the serial parameters (such as baud rate, data bits, parity, and stop bits) to match the modem's default settings.
4. Enter the default username (usually "admin") and password (usually "password") when prompted by the modem. If you don't know the default login details, you can check the modem's user manual or contact the modem's manufacturer.
5. Once you are logged into the modem's web interface, navigate to the "Maintenance" or "Backup/Restore" section.
6. Look for a list of backup files and select the "Restore" option next to the backup file that you want to restore. If you don't have any backup files, you can create a new one by selecting the "Create Backup" option.
7. Enter the required passwords and follow the on-screen instructions to restore the modem to its default settings.
8. Wait for the modem to fully restart.
9. Disconnect the serial cable and check the modem's LCD display to verify that the reset was successful. If the reset was successful, the modem will display the manufacturer's logo or a message indicating that it has been reset to its default settings.
In conclusion, the three methods described above are the most common and recommended ways to reset
