How to reset or factory restore Innostream INNO 79 device?
As Innostream INNO 79 is an old-style device using luxury desktop technology. The recommended way to reset or factory restore this device would depend on the specific problem or issue you are facing. However, here are some common methods to try:
Method 1: Hardware Reset
1.1. Disconnect all peripherals from the device.
1.2. Disconnect the power cord from the device.
1.3. Press and hold the "power" button and the "home" button simultaneously until the device starts beeping.
1.4. Release the buttons and wait for the device to power on.
1.5. This will reset the device to its default settings, and you will be prompted to enter the latest configuration settings.
Method 2: Factory Reset (Advanced)
2.1. Disconnect all peripherals from the device.
2.2. Disconnect the power cord from the device.
2.3. Open the device in repair mode.
2.4. Reset the device to its original configuration setting.
2.5. This method will erase all data on the device and reset it to its factory settings.
Method 3: Software Restore
3.1. Disconnect all peripherals from the device.
3.2. Disconnect the power cord from the device.
3.3. Download and install the latest software update from Innostream's official website.
3.4. Restart the device and wait for the software update to install.
3.5. Once the update is complete, the device will reset to its default settings.
Method 4: Configuration Reset (Advanced)
4.1. Enter the configuration menu by pressing and holding the "power" button, "home" button, and "0" button simultaneously until the device starts beeping.
4.2. Reset all settings back to their default values.
4.3. This method will reset the device's configuration but not the software. Check with Innostream technical support for more information.
Method 5: IntelliLink Multiple restores
This method is not recommended on a regular basis, but for those who want to change Innostream's system settings multiple times.
5.1. Keep existing mult restore data.
5.2. Disconnect all peripherals from the device.
5.3. Turn off InfiniTech intrusion detection.
5.4. Reset to default Inbestream default settings.
5.5. Reset to default InfiniTech settings.
5.6. Reset to default IntelliLink multibit based IFD/IFD settings.
5.7. Activate InfiniTech intrusion detection.
5.8. Reconnect all peripherals.
Note: It is essential to reset the device to its default settings, especially if you are unsure what changes were made to the device's system settings. Resetting the device may also erase settings that were made, and may not be retrieved. Always check with Innostream technical support before proceeding with any restoring procedures.
