Celkon C262

Home/ Celkon/ Phones/ C262

Table of Contents

Summary

Celkon C262 Price

The retail price of a new or used/second hand Celkon C262 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Celkon C262 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of Celkon C262?

The battery capacity of Celkon C262 is 1400 mAh

How to reset or factory restore Celkon C262 device?

To reset or factory restore a Celkon C262 device, there are multiple options available. Here are the most common and recommended methods: Method 1: Using the Home button and Volume down button 1. Turn off the device by holding the power button for 10 seconds until it turns off. 2. Press and hold the Home button and Volume down button simultaneously. 3. Continue holding both buttons until the Celkon logo appears on the screen. 4. Release both buttons and wait for the device to restart. 5. When the device restarts, it will be in recovery mode. 6. From the recovery menu, select "Yes -- Delete all user data/factory reset" and wait for the device to reset. 7. Once the device has reset, select "Reboot system now" and wait for the device to start up. Method 2: Using the recovery mode 1. Connect the device to a computer using a USB cable. 2. Open the Android Debug Bridge (ADB) on your computer and run the command "adb reboot recovery" to enter the recovery mode. 3. Once in recovery mode, select "Yes -- Delete all user data/factory reset" and wait for the device to reset. 4. Once the device has reset, select "Reboot system now" and wait for the device to start up. Method 3: Using the stock firmware 1. Download the stock firmware for your Celkon C262 device from the official Celkon website. 2. Connect the device to a computer using a USB cable. 3. Open the Android Debug Bridge (ADB) on your computer and run the command "adb push firmware.zip /sdcard/" to transfer the firmware to the device. 4. Disconnect the device and reboot it. 5. Once the device boots up, select "Install from SD card" and select the firmware.zip file from the list. 6. Follow the on-screen instructions to complete the installation. 7. Once the installation is complete, the device will be reset to its factory settings. It is important to note that resetting or factory restoring your device will erase all data and settings on your device, so it is recommended to backup any important data before performing any of these methods.