How to reset or factory restore Celkon C360 device?
reset or factory restore a Celkon C360 device, there are several methods you can try. Here are the most common and recommended ways:
Method 1: Using Recovery Mode and a PC
1. Turn off your Celkon C360 device completely.
2. Press and hold the volume down button and the power button simultaneously until the recovery menu appears.
3. On your computer, download and install the official Celkon C360 drivers and USB debugging drivers.
4. Connect your Celkon C360 device to your computer using a USB cable.
5. Open a command prompt window and type "adb devices" to check if your device is recognized by the computer.
6. Type "fastboot reboot recovery" to reboot your device into recovery mode.
7. Once your device is in recovery mode, select "Wipe data/factory reset" and confirm the selection.
8. Select "Yes -- erase all user data" and wait for the process to complete.
9. Once the process is complete, select "Reboot system" to reboot your device.
Method 2: Using X-UIPRODUCE Recovery
1. Turn off your Celkon C360 device completely.
2. Press and hold the power button and the volume up button simultaneously until the X-UIPRODUCE logo appears.
3. Release the power button and continue pressing the volume up button until the recovery menu appears.
4. Select "Wipe data/factory reset" and confirm the selection.
5. Select "Yes -- erase all user data" and wait for the process to complete.
6. Once the process is complete, select "Reboot system" to reboot your device.
Method 3: Using Hard Reset
1. Turn off your Celkon C360 device completely.
2. Remove the battery from the device.
3. Press and hold the power button for at least 30 seconds until the device turns off.
4. Reinsert the battery into the device.
5. Press and hold the power button again until the device turns on.
6. Connect your Celkon C360 device to a power source and let it charge for at least 30 minutes.
7. Turn off the device completely.
8. Reinsert the battery into the device.
9. Press and hold the power button until the recovery menu appears.
10. Select "Wipe data/factory reset" and confirm the selection.
11. Select "Yes -- erase all user data" and wait for the process to complete.
12. Once the process is complete, select "Reboot system" to reboot your device.
Note: Hard reset is the most comprehensive way to reset a Android device, but it may cause data loss if you haven`t created a backup before performing the reset process. It is always recommended to create a backup of your important data before performing any reset or factory restore process.
