How to reset or factory restore Celkon C359 device?
To reset or factory restore a Celkon C359 device, you can follow these common and recommended methods:
1. Using USB Debugging Bridge:
Bitmap Labs has developed a tool called Super Backup Flashing Tool that can help you to restore the flash of Celkon C359 device to its original state.
To do this, follow these steps:
- Connect the Celkon C359 device to your computer using a USB cable.
- Install USB Debugging Bridge drivers on your computer.
- Run Super Backup Flashing Tool and select Celkon C359 from the list of available devices.
- Click on Fix button to initiate the process.
- Once the process is complete, restart your device and it will be restored to its factory state.
2. Stop Resetting Procedure:
If you have tried to reset your Celkon C359 device using software but have stopped the process before it is complete, you can still try to stop the resetting procedure. Here's how:
- Turn off your device.
- Connect your device to your computer using a USB cable.
- Open a command prompt on your computer and type in the following command: Fastboot devices
- This will list all of the connected devices. Make sure that your Celkon C359 device is listed here.
- Type in the following command: Fastboot reset
- Press Enter.
- The device will enter recovery mode, where you can make a backup of any important data. Restart your device and it will be reset to its factory state.
3. Using Hard Reset:
If the above methods do not work, you can try a hard reset of the Celkon C359 device. This process will erase all of the data on your device and return it to its original state.
To do this, follow these steps:
- Turn off your device.
- Press and hold the power button for about 10 seconds.
- Release the power button and then press and hold the volume down button.
- Continue holding both buttons until a spinner icon appears on screen.
- Release the power button and press and hold the volume down button.
- Continue holding both buttons until the Celkon logo appears on screen.
- Release the volume down button and press and hold the power button.
- Release the power button and press and hold the volume down button.
- Continue holding both buttons until the spinner icon appears again.
- Release the volume down button and press and hold the power button.
- Release the power button and press and hold the volume down button.
- Continue holding both buttons until the spinner icon appears once more.
- Release the power button and press and hold the volume down button.
- Release the power button and press and hold the volume down button.
- Release both buttons when you see the "Erasing all user data" message.
- The device will now erase all of the data on your device and return it to its factory state. Reboot the device to complete the process.
Note: Resetting your device will erase all of your personal data, including your contacts, photos, and app data. Make sure to back up your important data before you begin the resetting process.
