Wiko Upulse lite

Home/ Wiko/ Phones/ Upulse lite

Table of Contents

Summary

Wiko Upulse lite Price

The retail price of a new or used/second hand Wiko Upulse lite varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Wiko Upulse lite across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of the Wiko Upulse Lite?

The Wiko Upulse Lite has a battery capacity of 3000 mAh

What type of display does the Wiko Upulse Lite have?

The Wiko Upulse Lite has a 5.7 inch IPS LCD display

What type of processor does the Wiko Upulse Lite have?

The Wiko Upulse Lite has an octa-core processor

How to reset or factory restore Wiko Upulse lite device?

There are several ways to reset or factory restore a Wiko Upulse lite device. Here are the most common and recommended methods: 1. Using Hardware Keys: * Turn off the device by pressing and holding the power button for a few seconds. * Press and hold the power button and the volume up button together for ten seconds until the device enters recovery mode. * In recovery mode, select "Wipe data/factory reset" using the volume keys and press the power button to confirm. * Wait for the device to reset and reboot. 2. Using Recovery Mode: * Turn off the device by pressing and holding the power button for a few seconds. * Connect the device to your computer using a USB cable. * Download and install the Wiko Upulse lite firmware from the official website or the Wiko website. * Once the firmware is installed, disconnect the device from the computer. * Turn on the device and enter recovery mode by pressing and holding the power button for a few seconds. * In recovery mode, select "Wipe data/factory reset" using the volume keys and press the power button to confirm. * Wait for the device to reset and reboot. 3. Using Software: * Download and install the Wiko Upulse lite firmware from the official website or the Wiko website. * Connect the device to your computer using a USB cable. * Install the firmware using the software provided. * Disconnect the device from the computer. * Turn on the device and wait for it to boot up. It's important to note that resetting your device to its factory settings will erase all data and personal settings, so it's recommended to back up your important data before resetting your device. Additionally, it's important to only use official Wiko firmware to avoid any potential damage to your device.

Specifications

Network

Technology: GSM / HSPA / LTE
2G bands: GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
3G bands: HSDPA 850 / 900 / 1900 / 2100
4G bands: 1, 3, 7, 20
Speed: HSPA 21.1/5.76 Mbps, LTE Cat4 150/50 Mbps