How to reset or factory restore Wiko WIM Lite device?
reset or factory restore a Wiko WIM Lite device
Html heading level 4
Resetting or factory restoring a Wiko WIM Lite device can be done in order to return the device to its original state and resolve any issues that may be present. In this guide, we will outline the most common and recommended ways to reset or factory restore a Wiko WIM Lite device.
Method 1: Using the recovery menu
1. Power off the device completely
2. Press and hold the power button and the volume down button simultaneously until the recovery menu appears.
3. Use the volume buttons to navigate through the menu and select "Wipe Data/Factory Reset."
4. Wait for the device to reset, which may take several minutes.
5. When the reset process is complete, select "Reboot System" to restart the device.
Method 2: Using the PC
1. Connect the device to the PC using a USB cable.
2. Install the Wiko driver software on your PC.
3. Open a command prompt window on your PC.
4. Navigate to the directory where the Wiko driver software is installed.
5. Type "adb push reset.img /sdcard/factory\_reset.img" and press enter.
6. Disconnect the device from the PC.
7. Power off the device completely.
8. Press and hold the power button and the volume down button simultaneously until the recovery menu appears.
9. Use the volume buttons to navigate through the menu and select "Wipe Data/Factory Reset."
10. Wait for the device to reset.
11. When the reset process is complete, select "Reboot System" to restart the device.
Method 3: Using the Wiki Bootloader
1. Install the Wiko Bootloader software on your PC.
2. Connect the device to the PC using a USB cable.
3. Open a command prompt window on your PC.
4. Navigate to the directory where the Wiko Bootloader software is installed.
5. Type "adb flash bootloader factory\_reset.img" and press enter.
6. Disconnect the device from the PC.
7. Power off the device completely.
8. Press and hold the power button and the volume down button simultaneously until the bootloader menu appears.
9. Use the volume buttons to navigate through the menu and select "Factory Reset."
10. Wait for the device to reset.
11. When the reset process is complete, select "Reboot System" to restart the device.
It's important to note that resetting or factory resting a device will erase all data and settings, so make sure to back up any important information before proceeding. Additionally, it's recommended to only use one of these methods at a time in order to avoid any potential issues.
