How to reset or factory restore verykool i625 device?
To reset or factory restore a Verykool i625 device, you can follow one of the below steps:
Method 1: Using the Volume Down and Power buttons
1. Turn off your Verykool i625 device completely.
2. Press and hold the Volume Down button and the Power button simultaneously.
3. The screen should display the "Fastboot" menu.
4. Simultaneously release both buttons and press the Volume Up button.
5. The device will now enter the recovery mode.
6. Once in the recovery mode, press and hold the Volume Up button and the Power button simultaneously.
7. The device will now restart in fast boot mode.
8. Connect your device to your computer using a USB cable.
9. Open a command prompt on your computer and type the following commands:
When connected to computer: fastboot devices
fastboot reboot recovery
fastboot flash recovery recovery.img
fastboot flash system system.img
Press enter after each command.
Method 2: Using the Volume Down and Power buttons with the Haaga Device Manager
1. Turn off your device completely.
2. Download and install the Haaga Device Manager on your computer.
3. Connect your device to your computer using a USB cable.
4. Launch the Haaga Device Manager software on your computer.
5. Select your device from the list of detected devices.
6. On the device tab, click the Full recovery:ellipsis button.
7. Your device will now restart in recovery mode.
8. From recovery mode, perform a full system restore or reset to factory settings according to your preference.
9. After completing the restoration or reset, reboot your device.
Method 3: Using the Haaga Device Manager with a PC toolbox
1. Turn off your device completely.
2. Download and install the Haaga Device Manager on your computer.
3. Connect your device to your computer using a USB cable.
4. Launch the Haaga Device Manager software on your computer.
5. Select your device from the list of detected devices.
6. On the device tab, click the Full recovery:ellipsis button.
7. Your device will now restart in recovery mode.
8. From recovery mode, perform a full system restore or reset to factory settings according to your preference.
9. After completing the restoration or reset, reboot your device.
For the factory reset, you should proceed with caution as it will erase all the data on your device. Make sure to back up all your important data before performing a factory reset.
