How to reset or factory restore verykool i130 device?
Sure, I'd be happy to help you with that! Here are the most common and recommended ways to reset or factory restore a VeryKool i130 device:
1. Software Update: The first way to reset your VeryKool i130 device is to update its software. This method helps to reinstall the operating system on your phone, while all your data will remain.
Steps:
a. Go to the VeryKool support website and download the latest software update for your device.
b. Connect your phone to your PC using a USB cable.
c. Install the software update on your PC.
d. Connect your phone to the USB cable, enable USB debugging, and select the "Device Configuration" option.
e. Use a recovery manager like VCom Commander to flash the update to your phone.
2. Simple Reset: If you only want to reset your device to factory settings without losing all your data, the Simple Reset option is ideal. This method will erase all the apps and data on your device but retain the SIM card information.
Steps:
a. Press and hold the "Menu" and "Power" keys simultaneously for 10 seconds.
b. Release the "Power" key.
c. If prompted with an option to download a recovery from your PC, choose "Yes" and connect your device to your PC.
d. Follow the recovery manager as described above, and choose the "Simple Reset" option.
e. Wait for the device to reboot.
3. Full Restore: A hardware reset is the most effective and recommended method to factory restore your VeryKool i130 device. This method involves resetting the device to its original state and requires a full battery backup, i.e., you'll need to drain your device completely before performing this reset.
Steps:
a. Back up all your device data to your PC.
b. Disconnect your device from the charger and other USB cables.
c. Press and hold the "Menu" and "Power" keys simultaneously for 10 seconds.
d. Release the "Power" key.
e. The device will now start in bootloader mode.
f. Connect your device to the PC and select "Backup Firmware" in the recovery manager.
g. Follow the recovery manager as mentioned above, and choose "Full Restore" option.
h. Wait for the device to reboot. Finally, connect the USB cable to empty battery, and start using your device.
Please note that a hardware reset will erase all data on your device, including SIM card information, so make sure to backup your data before performing this reset.
