How to reset or factory restore Sharp FX device?
Sharp FX devices can be reset or factory restored using the following methods:
Method1: Using a Computer and USB cable
1. Connect your Sharp FX device to your computer using a USB cable.
2. Download and install the USB driver software for your device on your computer from the Sharp website ()
3. Open the device manager on your computer, and navigate to the list of USB devices.
4. Right-click on your device and select "Properties".
5. Click on the "Power Management" tab, and check "Allow this device to wake the computer".
6. Close all other applications and programs on your computer that might interfere with the reset process.
7. Reboot your computer and press the "Function + Volume Down + Power" keys on your device to enter Recovery Mode (Recovery Mode may vary depending on the device).
8. Once you are in Recovery Mode, using the volume keys to navigate and select "Factory Data Reset" and press the Power key to confirm the selection.
9. Wait for the reset process to complete, which may take several minutes.
10. Once the reset process is complete, the device will restart and you can set up the device as new.
Method 2: Using the Reset Button on the Device
1. Turn off the device by holding the power button for 10 seconds until the device shuts down completely.
2. Press and hold the power button and the "Volume Down" button simultaneously for 20 seconds until the screen flickers.
3. Release the power button, but continue holding the "Volume Down" button. The device should enter Recovery Mode.
4. Once you are in Recovery Mode, using the volume keys to navigate and select "Factory Data Reset" and press the power key to confirm the selection.
5. Wait for the reset process to complete, which may take several minutes.
6. Once the reset process is complete, the device will restart and you can set up the device as new.
