How to reset or factory restore Sharp 936SH device?
The 936SH device is a Sharp smartphone. There are a few steps you can follow to reset or factory restore this device. Here are the most common and recommended methods:
Method 1: Using Hardware Keys
1. Turn off the device completely.
2. Hold down the Volume up button and the Power button at the same time until the Sharp logo appears on the screen.
3. Release both buttons, then hold down the Volume up button and the Power button again at the same time.
4. After a few seconds, the device will enter the bootloader screen.
5. On the bootloader screen, you will see a menu with various options. Locate and select the option labeled "Factory Data Reset" or "Reset to Default."
6. Use the Volume keys to navigate to the next screen and select "Yes -- Delete all user data."
7. The device will now begin the process of resetting to factory settings. This may take some time, so be patient.
8. Once the reset is complete, the device will reboot and prompt you to set it up as a new device.
Method 2: Using the Built-in Reset Option
1. Go to the Settings app on your device.
2. Scroll down and tap on "About phone."
3. Tap on "Software information" or "Software info."
4. Scroll down and tap on "Build number." Tap on it repeatedly until you see a message that says "You are now a developer!"
5. Go back to the Settings app and scroll down to "System" or "System settings."
6. Tap on "Advanced" or "Advanced settings."
7. Scroll down and tap on "Reset options."
8. Tap on "Factory data reset."
9. Confirm the reset by tapping on "Yes -- Delete all user data."
10. The device will now begin the process of resetting to factory settings. This may take some time, so be patient.
11. Once the reset is complete, the device will reboot and prompt you to set it up as a new device.
Method 3: Using a PC or Mac
1. Connect your device to your computer using a USB cable.
2. Open a file explorer window on your computer and navigate to the "multiport" folder. Then navigate to the "devoft" folder, and then to the "Sharp" folder.
3. Open the "SHARP.INF" file using a text editor. This file contains the firmware for your device.
4. Look for the firmware version and any other relevant details.
5. Follow the instructions in the firmware file to reset your device to factory settings.
6. Once the reset is complete, you can use the Sharp's PC Suite or a tool called ZAPER to flash the new firmware onto your device.
7. Disconnect your device from the computer and reboot it.
8. The device will now begin the process of resetting to factory settings. This may take some time, so be patient.
9. Once the reset is complete, the device will reboot and prompt you to set it up as a new device.
These are the most common and recommended ways to reset or factory restore a Sharp 936SH device. Please note that the process may vary slightly depending on which method you choose. Also, always make sure to back up any important data before resetting your device.
