How to reset or factory restore Sewon SG-2200 device?
The Sewon SG-2200 is an IP video surveillance device that can be reset or factory restored using several methods. The most common and recommended ways to reset or factory restore a Sewon SG-2200 are as follows:
Method 1: Using the Sewon SG-2200 Web Interface
1. Log in to the Sewon SG-2200 web interface using the default login credentials (IP address: 192.168.1.254, username: "admin," and password: "password").
2. Access the "Factory Reset" or "System" section from the main menu, depending on the version of the device.
3. Follow the on-screen instructions to confirm the factory reset.
4. The device will reset itself and reboot, wiping all settings and settings.
Method 2: Using a Physical Jumper
1. Connect the Sewon SG-2200 device to a computer or network using a USB or Ethernet cable.
2. Access the device using a web browser or an application specific to the device.
3. Navigate to the "Factory Reset" or "System" section and follow the on-screen instructions to confirm the factory reset.
4. The device will reverse to its factory state and reboot, clearing all settings and configurations.
Method 3: Using the Sewon SG-2200 Command Line Interface (CLI)
1. Connect the Sewon SG-2200 device to a computer or network using a USB or Ethernet cable.
2. Access the device using a terminal or command prompt on the computer.
3. Enter the default login credentials (IP address: 192.168.1.254, username: "admin," and password: "password").
4. Type "factoryreset" and press Enter, then confirm the reset when prompted.
5. The device will reset itself and reboot, wiping all settings and configurations.
Note that it is recommended to backup important data before resetting the device and to only use these methods as a last resort. Additionally, it's important to be aware that resetting the device to the factory state may result in the loss of all settings and configurations.
