How to reset or factory restore Sewon SG-2000 device?
The most common and recommended ways to reset or factory restore a Sewon SG-2000 device are as follows:
1. Resetting to Default Settings
To reset the device to its default settings, follow these steps:
Step 1: Power On/Off the Device
Power off the device, then unplug it from the power source and leave it unplugged for at least 30 seconds.
Step 2: Press the Reset Button
While there are no specific instructions regarding the location of the reset button on the SG-2000, it may be located on the back panel of the device or underneath the screen. Press and hold the button for around 10 seconds.
Step 3: Release the Reset Button
Release the reset button and wait for the device to power on. Once the device has powered on, it should display its default settings.
2. Factory Reset
A factory reset is a process that restores the device to its original factory settings, deleting all user-added configurations, settings, and data.
Step 1: Connect the Device to a Computer
Connect the SG-2000 device to a computer using the provided USB cable.
Step 2: Download the SG-2000 Firmware
Visit Sewon's website and download the latest firmware for the SG-2000 device.
Step 3: Install the Firmware
Install the firmware on your computer using the provided installer.
Step 4: Connect the Device to a Computer (Continued)
Connect the SG-2000 device to the computer using the provided USB cable.
Step 5: Run the Firmware Update Utility
Launch the firmware update utility provided with the firmware installer and follow the on-screen instructions to update the device's firmware to the latest version.
Step 6: Reset the Device
Once the firmware update is complete, the device will reset itself to its default settings. Wait for the device to power on and verify that the device has been factory reset.
