Sewon SG-2100CS

Home/ Sewon/ Phones/ SG-2100CS

Table of Contents

Summary

Sewon SG-2100CS Price

The retail price of a new or used/second hand Sewon SG-2100CS varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Sewon SG-2100CS across different regions, markets and countries.

Frequently Asked Questions(FAQs)

How to reset or factory restore Sewon SG-2100CS device?

The Sewon SG-2100CS is a programmable logic controller (PLC) used in various automation applications. When it's necessary to reset or factory restore the SG-2100CS, the process as explained below should be followed: 1. Power Off: The device should be powered off completely before attempting to reset. The power supply switch of the PLC should be turned off to completely disconnect the device from power. 2. Remove Backplane: The backplane module is the type of modular components used to connect the input/output (I/O) modules. To access the SG-2100CS processor, the backplane should be removed. 3. Disconnect the Processors: Using a voltage tester, confirm that the power supply to the processor is off. The SG-2100CS has two processors (P1 and P2). P1 is responsible for the runtime programs, while P2 holds the object database. 4. Reset Processors: Using the reset button provided by Sewon, reset each processor in sequence. Press and hold the RESET button for 30 seconds. Repeat the process for each processor. 5. Remove memory cable: The PLC SG-2100CS has a memory SIM card. This SIM card ROM holding the PLC's configuration files, program database, and system variables. To reset/factory reset the PLC, the memory card should be removed from the processor. 6. Remove configuration files: Sewon recommends you delete all the configuration files on the SIM card. This file deletion will clear all the program, controls, ladder, Scratch, etc. Also, it will reset the system time and counters. 7. Factory Install Firmware: Place the new factory firmware on the processor. The firmware package can be downloaded from Sewon's website. The product identifier is SG-2100CS-ERC5-FIRM04. 8. Replace the memory card: Replace the memory SIM card back into each processor. Make sure that you download and put the correct firmware files on the device. 9. Install the Program Database: Load the program database by providing the appropriate input variables in the correct format. After that, run the script PLCDIV4.DDB. 10. Power On: After completing the reset procedure, reconnect the backplane and power supply switch. Power on the device to verify that the SG-2100CS has been successfully reset/factory restored. 11. Test Functionality: After resetting the device, it's best to start working with a simple ladder logic. To ensure that the device is working correctly, check the output status by selecting the output from the function chart or ladder logic editor. It's essential to note that the most common and recommended ways for a factory reset of the Sewon SG-2100CS would be detailed above. These steps can be useful for all models.