How to reset or factory restore Sewon SG-2200CD device?
Sewon is a reputable brand of digital signage devices, including the SG-2200CD. When faced with the need to reset or factory restore a Sewon SG-2200CD, there are a few common and recommended ways to do so depending on the situation. Here's a detailed explanation of each method:
1. Using the USB Flash Drive: One of the most common and recommended methods to reset a Sewon SG-2200CD is to use a USB flash drive. Here are the steps:
a. Connect your SG-2200CD to a computer using a USB cable.
b. Insert the USB flash drive into the computer.
c. Reboot the computer while the SG-2200CD is connected.
d. Click on the Sewon logo on the computer screen and enter the default login information: Admin/SEWON.
e. Click on the "Firmware Update" option and then select the "Factory Reset" option.
f. Confirm the reset process and wait for the device to restart.
g. Once the device has restarted, log into the device with the new login information (usually Admin/SEWON).
2. Using the Recovery Disk: Another common and recommended method to reset a Sewon SG-2200CD is to use the recovery disk. Here are the steps:
a. Connect your SG-2200CD to a computer using a USB cable.
b. Boot the device with the recovery disk instead of the regular operating system.
c. Follow the on-screen instructions to log into the Sewon Recovery Disc interface.
d. Select the "Factory Reset" option to erase all data and settings on the device.
e. Confirm the reset process and wait for the device to restart.
f. Once the device has restarted, log into the device with the new login information (usually Admin/SEWON).
3. Using the Command Line Interface: If you have access to the Sewon SG-2200CD's command line interface (CLI), you can use it to reset the device. Here are the steps:
a. Connect your SG-2200CD to a computer using a USB cable.
b. Open a command prompt on your computer.
c. Use the "ipconfig" command to find the IP address of the SG-2200CD on your network. This can be done by entering "ipconfig / wirelessconfig" or "ipconfig /all" into the command prompt.
d. Enter the default login information for the Sewon SG-2200CD (usually Admin/SEWON) into the command prompt.
e. Enter the "wipedata" command to reset all data and settings on the device.
f. Confirm the reset process and wait for the device to restart.
g. Once the device has restarted, log into the device with the new login information (usually Admin/SEWON).
Overall, factory resetting a Sewon SG-2200CD device can be a useful troubleshooting step when faced with issues with the device, but it should only be done as a last resort. It's always recommended to back up any important data before attempting a reset or factory restore.
