What are the main features of the Plum Trigger Z104?
The Plum Trigger Z104 features a 5.5-inch HD+ display, a quad-core processor, 2GB of RAM, 32GB of storage, and a 13MP rear camera.
What type of battery does the Plum Trigger Z104 have?
The Plum Trigger Z104 has a 3,000 mAh battery.
What type of operating system does the Plum Trigger Z104 use?
The Plum Trigger Z104 runs on Android 9.0 Pie.
How to reset or factory restore Plum Trigger Z104 device?
To reset or factory restore a Plum Trigger Z104 device, you can follow the steps below:
1. Turn off the device: Before performing any reset operation, make sure the device is turned off. To turn off the device, press and hold the power button for about 10 seconds or until the device status light stops flashing.
2. Connect the device to a computer: Connect the device to a computer using a USB cable that is compatible with the device and the computer. Make sure the computer has the latest version of the Plum Trigger Z104 driver installed.
3. Enter recovery mode: Press the "Recovery" button at the back of the device until the device enters the recovery mode. The device will display the "Plum Trigger Z104 Recovery" logo and the serial number that is located on the bottom of the device.
4. Backup important data: If you have any important data stored on the device, it is recommended to make a backup of the data. You can backup your data using the recovery mode.
5. Reset the device: Once you have backed up your data, select "Factory Reset" from the menu in the recovery mode. This will erase all data and restore the device to its factory settings. Make sure to confirm that you want to perform the reset before proceeding.
6. Exit recovery mode: Once the reset is complete, select the "Exit Recovery" option from the menu. The device will reboot and show the Plum Trigger Z104 logo.
7. Check the device: After the device has rebooted, check that all the settings are reset to their factory settings. It is recommended to verify that all important data has been backed up before using the device again.
Note: It is recommended to perform a factory reset only as a last resort. A factory reset will erase all data and reset the device to its factory settings. Therefore, make sure you have a backup of important data before performing a factory reset.
