Philips Genie db

Home/ Philips/ Phones/ Genie db

Table of Contents

Summary

Philips Genie db Price

The retail price of a new or used/second hand Philips Genie db varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Philips Genie db across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery life of Philips Genie db?

The battery life of Philips Genie db is up to 10 hours.

What is the display size of Philips Genie db?

The display size of Philips Genie db is 5.5 inches.

What is the operating system of Philips Genie db?

The operating system of Philips Genie db is Android 6.0 Marshmallow.

How to reset or factory restore Philips Genie db device?

Philips Genie DB is a residential distributed database communication device that allows you to manage and control various Philips home devices. If you encounter any issues with your Philips Genie DB device, you may need to reset or factory restore it to its default setting. Here are the most common and recommended ways to reset or factory restore a Philips Genie db device: Method 1: Resetting the device will erase all settings, including any customizations and configurations you have made, and restore it to its factory settings. To reset the device, perform the following steps: 1. Locate the reset button on the device. This button may be covered by a small flap or located in a recessed area, so it may take some looking. 2. Press and hold the reset button for 25 seconds, until the device's lights flash rapidly for several seconds. 3. Release the reset button, and wait for the device's lights to flash rapidly for several more seconds. Repeat this process until the device's lights turn off. 4. Once the device's lights turn off, it will reset to its factory settings. Reconfigure the device according to the manufacturer's instructions provided with the device. Method 2: If the device is not responding even after resetting and if you need to completely restore the device to its factory settings, you can try a factory restore. To perform a factory restore, follow these steps: 1. Connect the device to your computer using a USB cable. 2. Open a web browser and navigate to the Philips Support website. 3. Log in to the Philips Support website and go to the web interface for the Philips Genie DB device. 4. Follow the instructions provided on the web interface to perform a factory restore. Be sure to follow all instructions carefully, as the process can damage the device if done incorrectly. 5. Once the device has been successfully restored, disconnect it from the computer and follow the manufacturer's instructions to reconfigure the device according to your needs. Note: Performing a full factory restore will erase all settings, including any customizations and configurations you have made, and restore the device to its default settings. This process should be done as a last resort and only when all other methods have failed to resolve the issue with your device.