How to reset or factory restore Philips Savvy DB device?
Sure, I'd be happy to explain the most common and recommended ways to reset or factory restore a Philips Savvy DB device.
Before we begin, it's important to note that resetting or restoring the device will erase all user settings, data, and account information, so it should only be done as a last resort or if absolutely necessary. It's always a good idea to take a backup of any important information before performing a reset or factory restore.
Now, onto the different methods of resetting or factory restoring a Philips Savvy DB device:
1. Using the Philips MySound app
The easiest and most convenient way to reset or factory restore a Philips Savvy DB device is to use the Philips MySound app. Follow these steps:
* Install and open the Philips MySound app on your mobile device.
* Connect the Philips Savvy DB device to your mobile device using Bluetooth or NFC.
* Tap on the device name in the app's device list.
* Scroll down and tap on "Factory Reset".
* Enter the passcode to confirm the reset.
* Wait for the device to reset, which may take a few minutes.
* Once the reset is complete, pair the device with your mobile device again and follow the on-screen prompts to set it up.
Note: If you don't have access to the Philips MySound app for any reason, you can still reset the device using the manual method described below.
2. Using the manual method
If you don't have access to the Philips MySound app, you can still reset the device using the manual method. Follow these steps:
* Turn off the Philips Savvy DB device and unplug the charging cable from the device.
* Press and hold the "Power" and "Source" buttons at the same time for five seconds.
* Release both buttons and wait for the device to turn on.
* Follow the on-screen prompts to reset the device.
* Enter the passcode to confirm the reset, if applicable.
* Wait for the device to reset, which may take a few minutes.
* Once the reset is complete, connect the device to a power source and follow the on-screen prompts to set it up.
Note: Factory resetting the Philips Savvy DB device will also erase all user settings, data, and account information, so it should only be done as a last resort or if absolutely necessary. If you experience any problems with the device after resetting it, it may be advisable to contact Philips customer support for further assistance.
