How to reset or factory restore NEC N930 device?
A NEC N930 device can be restored to its factory default settings, or reset, using one of the methods described below. Before performing any of these routes, it is important to back up any important user data and settings, as the restoration process will erase all user data and settings on the device. It is also important to note that the restoration process may take some time to complete and may require a stable internet connection.
Method 1: Using the NEC N930 App
The recommended way to reset a NEC N930 device is by using the NEC N930 app. Here are the steps to do so:
1. Download and install the latest version of the NEC N930 app from the Google Play Store.
2. Connect the NEC N930 device to the internet.
3. Open the NEC N930 app and tap on the "Settings" icon located at the bottom of the screen.
4. Tap on the "Reset Device" option located under "Advanced Settings".
5. Enter your device password and tap "Yes to confirm reset".
6. Wait for the reset process to complete, which may take several minutes.
7. Once the process is complete, the device will restart and you can set it up as a new device.
Method 2: Using the NEC N930 Device Manager
Another way to reset a NEC N930 device is by using the NEC N930 Device Manager. Here are the steps to do so:
1. Connect the NEC N930 device to the internet.
2. Open the NEC N930 Device Manager website on your computer.
3. Log in with your NEC N930 account credentials.
4. Find your NEC N930 device in the list of devices and click on it.
5. click on the "Firmware Update" tab.
6. Select "Firmware Update" and scroll down to find the "Reset Device" option.
7. Follow the instructions on the screen and wait for the reset process to complete.
8. Once the process is complete, the device will restart and you can set it up as a new device.
Method 3: Using a Hard Reset
A hard reset is a process that resets the NEC N930 device to its factory settings by manually resetting the device's hardware components. This method should only be used as a last resort, as it may damage the device's hardware if not done correctly. Here are the steps to perform a hard reset on a NEC N930 device:
1. Turn off the NEC N930 device by holding the power button for 20 seconds until the device turns off.
2. Hold the power button and the volume down button at the same time for 10 seconds until the device enters the bootloader.
3. Release the power button and volume down button and press and hold the power button to boot into recovery mode.
4. Select "Delete all user data" and confirm the action.
5. Wait for the device to reset and reboot.
6. Set up the device as a new device.
It is important to note that the above methods are just the recommended ways and NEC Support should be consulted if any of these methods fails to reset the device.
