How to reset or factory restore NEC e238 device?
NEC e238 is a type of network interface card (NIC) used for networking on IBM-compatible PCs. It is often used in small office or home networks to connect devices such as computers, printers, and routers. If you want to reset or factory restore your NEC e238 device, you can do so using the following commonly recommended methods:
Method 1: Resetting the BIOS settings
1. Reboot the computer and press the F2 key during the boot-up process to enter the BIOS settings menu.
2. Go to the BIOS settings for the NEC e238 device, which is usually located under the "Advanced Settings" or "Network Adapter" menu.
3. Look for the "Optional BIOS Settings" section and find the "Reset BIOS to Menu Default Settings" option.
4. Enable the "Reset BIOS to Menu Default Settings" option and then reboot the computer.
Method 2: Factory Resetting the NIC
1. Connect the NEC e238 device to the computer using a USB or USB-C cable, and ensure that it is active in the BIOS settings.
2. Enter into the BIOS settings menu and look for the "Compatibility" options section.
3. Turn on the "Functions Menu Support" option, then turn on the "3C5xxE-Completable PCI-PCI Bridge Configuration" option and turn on the "3C5xxE-Completable Serial Debug & BIOS Bridging" option.
4. Reboot the computer to enter the priority setup menu by pressing F2, F10, DEL or the Restart button.
5. Choose "Option 6 - Action" and select "Configuration".
6. Choose "Option 11 - Reset Device NO" and select the NEC e238 device.
7. Press "OK" to Reset the device to Factory Settings.
Method 3: Using a recovery utility
1. Download and install a recovery utility that is compatible with your NEC e238 device. You can find many recovery utilities available online that are designed to restore your device to its factory settings.
2. Connect the NEC e238 device to the computer using a USB or USB-C cable.
3. Run the recovery utility and follow the instructions provided on screen to enter the device number and confirm the option to res
