How to reset or factory restore NEC N630 device?
Sure, I can help you with that. Here are the most common and recommended ways to reset or factory restore a NEC N630 device:
1. Using the Reset Button: The most common method to reset a NEC N630 device is to press and hold the reset button for a few seconds until the device starts resetting. After the device starts resetting, release the reset button and wait until the device stopsresetting. Once the device stops resetting, it should power off and then back on.
2. Using the DIP switch: Another method to reset a NEC N630 device is to use the DIP switch. Locate the DIP switch on the device and press and hold the "4" or "5" switch for a few seconds until the device starts resetting. After the device starts resetting, release the DIP switch and wait until the device stops resetting. Once the device stops resetting, it should power off and then back on.
3. Using the Shortener Circuit: You can also reset a NEC N630 device by connecting the device to a shortener circuit. Connect one end of the shortener circuit to the Ground parameter and the other end to the Auxiliary power supply. Power on the device and press and hold the Auxiliary power button for a few seconds until the device starts resetting. After the device starts resetting, release the Auxiliary power button and wait until the device stops resetting. Once the device stops resetting, it should power off and then back on.
4. Using the GUI Reset Method: You can also reset a NEC N630 device using the Graphical User Interface (GUI) reset method. Press and hold the "SETTINGS" button for a few seconds until the MENU appears. Press and hold the "RESET" button while pressing and holding the "EEM" button. The device should start resetting, and after a few seconds, it will reset to its default factory settings.
Note: Before resetting your NEC N630 device, make sure to note down any important settings or user data to avoid losing them during the reset process.
