How to reset or factory restore Lava X3 (2016) device?
Resetting or factory resetting a Lava X3 (2016) device can be helpful if the device is experiencing many problems, slow, or virus-infected. Before resetting the device, make sure to back up any important data, as all files and applications will be removed during the process. Here are the most common and recommended ways to reset a Lava X3 (2016) device:
1. Using the power button and volume buttons:
a. Turn off the device by holding down the power button for a few seconds until the device turns off.
b. Press and hold the power button and volume up button simultaneously for about 8-10 seconds until the Lava logo appears on the screen.
c. Release the buttons, and the device will enter recovery mode. In recovery mode, you can choose to reset the device by selecting "Reset Device" and confirming your selection.
2. Using a computer with a USB cable:
a. Connect the device to the computer using the USB cable.
b. Backup all important data by copying it from the device to the computer.
c. Open a command prompt from the computer and enter the following command to check for updates:
d. Check for updates and if there is an update available, download it.
e. Enter the following command to reset the device to factory settings:
f. After resetting the device, transfer the backup data back to the device if available.
3. Using the recovery mode:
a. Turn off the device by holding down the power button for a few seconds until the device turns off.
b. Press and hold the power button and volume up button simultaneously for about 8-10 seconds until the Lava logo appears on the screen.
c. Release the buttons, and the device will enter recovery mode. In recovery mode, you can choose to reset the device by selecting "Reset Device" and confirming your selection.
It is highly recommended to avoid resetting the device to factory settings via recovery mode, as it can cause the device to become unavailable for use until the device is restored back to its original factory settings. It is also recommended to make sure the device is fully charged before proceeding with any resetting process.
