How to reset or factory restore Lava A71 device?
There are two most common ways to reset or factory restore a Lava A71 device:
1. Using the Power and Volume Buttons:
* Turn off the device by pressing and holding the power button until the power off screen appears.
* Press and hold the power button and volume up button at the same time.
* Release the buttons when the Lava logo appears.
* Use the volume buttons to highlight "Wipe data/factory reset" and press the power button to select it.
* Use the volume buttons to highlight "Yes - delete all user data" and press the power button to select it.
* The device will now begin the reset process and will delete all user data. This may take several minutes to complete.
2. Using the USB Debugging Bridge:
* Connect the device to a computer with a USB cable.
* Open a command prompt window on the computer.
* Navigate to the directory where the Android SDK platform-tools folder is located.
* Type the following command to ensure that the USB debugging bridge is enabled on the device:
adb devices
* If the device is listed, proceed with the next step. If not, enable USB debugging on the device by going to Settings > Developer options > USB debugging.
* Type the following command to reset the device to its factory settings:
adb reboot recovery
* Once the device is in recovery mode, use the volume buttons to highlight "Wipe data/factory reset" and press the power button to select it.
* Use the volume buttons to highlight "Yes - delete all user data" and press the power button to select it.
* The device will now begin the reset process and will delete all user data. This may take several minutes to complete.
Note: It's important to back up any important data before resetting the device, as all data will be deleted during the reset process.
