How to reset or factory restore Ericsson GO 118 device?
Resetting or factory restoring an Ericsson GO 118 device can be helpful when there is a problem with the device, or if it is not working as expected. The following are the most common and recommended ways to reset or factory restore an Ericsson GO 118 device:
1. Using the Reset Menu:
* Turn off the device
* Press and hold the 1 key until the light turns red
* Release the key
* Press and hold the 2 key until the light turns green
* Release the key
* Press and hold the 1 key until the light turns blue
* Release the key
* Press and hold the 1 and 2 keys together until the light turns red again
* Release the keys
* Press and hold the 1 key until the light turns green
* Release the key
* Press and hold the 2 and 3 keys together until the light turns blue again
* Release the keys
* Press and hold the NO key until the device boots up to the main menu
2. Using a Windows PC:
* Connect the device to your Windows PC using a USB cable
* Open the Device Manager and locate the Ericsson GO 118 device
* Right-click on the device and select "Properties"
* In the "Properties" window, click on the "Firmware" tab
* Click on the "Update" button and browse to the firmware file for your device
* Install the firmware on your device
3. Using the Bluetooth User Interface:
* Turn off the device
* Enter 118 as a PIN when prompted
* Follow the on-screen instructions to complete the reset or factory restore process
Note: Resetting or factory restoring your device will erase all data on the device, so make sure to back up any important information before resetting or factory restoring your device.
