How to reset or factory restore Ericsson GA 318 device?
The Ericsson GA 318 is a mobile broadband gateway that can be reset or factory restored in several ways depending on the device model and firmware version. Here are the most common and recommended ways to reset or factory restore a Ericsson GA 318 device:
1. Duty Cycle Reset
The Duty Cycle Reset is the most common and recommended way to reset an Ericsson GA 318 device. This method involves using the Web browser to login to the device's management interface and perform a duty cycle reset. The duty cycle reset will erase all user configurations, settings, and data on the device. To perform a duty cycle reset, follow these steps:
* Open a web browser on a computer or mobile device.
* Type the device's IP address in the address bar (default is 192.168.0.100).
* Enter the default username and password (default is admin/admin).
* Click on the "Configure" button.
* Click on the "Factory Default User" button.
* Click on the "Yes" button to confirm the factory default.
* Click on the "Home" button to return to the main menu.
* Click on the "System Configuration" button.
* Click on the "Ethernet" tab.
* Select "Management" from the dropdown menu.
* Click on the "Enable" button.
* Wait for the duty cycle reset to complete, which may take several minutes.
2. ROM Image Flashing
If the duty cycle reset does not work, or if you need to update the device's firmware, you can use the ROM image flashing method. This method involves downloading a ROM image file from the Ericsson website and flashing it onto the device using a TFTP client. To perform a ROM image flashing, follow these steps:
* Download the ROM image file for your device from the Ericsson website.
* Connect the device to a computer or mobile device using a USB cable or Ethernet cable (depending on the device's configuration).
* Launch a TFTP client (such as tftp or TFTPd).
* Configure the TFTP client to use the device's IP address and port number (default is 192.168.0.1).
* Upload the ROM image file to the TFTP client.
* Start a new DHCP request on the device to obtain a new IP address.
* Reset the device to its default factory settings by accessing the device's management interface and selecting "Factory Default User".
* Perform the duty cycle reset again to complete the ROM image flashing process.
3. Remote Access
In some cases, it may not be possible to physically access the device to perform a reset or factory restore. In this situation, you can use the remote access method to access the device's management interface from a remote location. To perform a remote access, follow these steps:
* Connect the device to the internet using the recommended configuration (such as DHCP or manual IP address).
* Open a web browser on a computer or mobile device.
* Type the device's IP address in the address bar.
* Enter the default username and password (default is admin/admin).
* Click on the "Configure" button.
