Cubot KingKong Mini 2

Home/ Cubot/ Phones/ KingKong Mini 2
Cubot KingKong Mini 2 image - Nikonet125.com
An image of the Cubot KingKong Mini 2.
Table of Contents


Cubot KingKong Mini 2 Price

The retail price of a new or used/second hand Cubot KingKong Mini 2 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Cubot KingKong Mini 2 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of the Cubot KingKong Mini 2?

The battery capacity of the Cubot KingKong Mini 2 is 4000mAh

What is the display size of the Cubot KingKong Mini 2?

The display size of the Cubot KingKong Mini 2 is 5.5 inches

How to reset or factory restore Cubot KingKong Mini 2 device?

If you want to reset or factory restore a Cubot KingKong Mini 2 device, there are several ways you can do so. Here are the most common and recommended methods: Method 1: Using the hardware buttons 1. Turn off the Cubot KingKong Mini 2 device by pressing and holding the power button for 10 seconds. 2. Press and hold the power button, volume up button, and volume down button at the same time for 30 seconds. 3. After 30 seconds, release all the buttons. 4. The device will enter recovery mode. Use the volume buttons to navigate menu and the power button to select options. 5. In recovery mode, select "Wipe data/factory reset" and confirm your choice. 6. The device will start the reset process, which can take several minutes. 7. Once the reset is complete, the device will reboot and reset to its factory settings. Method 2: Using the recovery software 1. Download and install the Cubot KingKong Mini 2 recovery software onto your computer. 2. Connect the Cubot KingKong Mini 2 device to your computer using a USB cable. 3. Open the recovery software and your computer will detect the Cubot KingKong Mini 2 device. 4. Click on the "Recover" button in the recovery software. 5. Select "Wipe data/factory reset" and confirm your choice. 6. The device will start the reset process, which can take several minutes. 7. Once the reset is complete, the device will reboot and reset to its factory settings. Method 3: Using the OTA (Over-the-air) update method 1. Go to the Cubot website and download the "KingKong Mini 2 update" file. 2. Place the KingKong Mini 2 device into recovery mode by pressing and holding the power button, volume up button, and volume down button at the same time for 10 seconds. 3. When the recovery menu appears, select "Update" and confirm your choice. 4. Select the "System Update" option and browse to the update file you downloaded earlier. 5. Enable "Deflate Compression" and select "Install" to start the update. 6. The device will start updating and can take several minutes to complete the process. 7. Once the update is complete, the device will reboot and log in to your account. You will be prompted to update the firmware to the latest version. Once the update is complete, the device will reset to its factory settings. These are the most common and recommended methods for resetting or factory restoring a Cubot KingKong Mini 2 device. It's important to note that resetting or factory restoring your device can erase all data, including your contacts, messages, and other saved files. Make sure to backup any important information before resetting your device.

What is the internal storage of the Cubot KingKong Mini 2?

The internal storage of the Cubot KingKong Mini 2 is 16GB


Specifications

Network

Technology: GSM / HSPA / LTE
2G bands: GSM 850 / 900 / 1800 / 1900 - SIM 1 & SIM 2
3G bands: HSDPA 900 / 2100
4G bands: 1, 3, 7, 8, 19, 20
Speed: HSPA, LTE

Launch

Announced: 2020
Status: Available. Released 2020

Body

Dimensions: 119 x 58 x 12.1 mm (4.69 x 2.28 x 0.48 in)
Weight: 122.7 g (4.34 oz)
SIM: Dual SIM (Nano-SIM, dual stand-by)
: Water/dust resistant

Display

Type: IPS LCD
Size: 4.0 inches, 41.3 cm2 (~59.8% screen-to-body ratio)
Resolution: 540 x 1080 pixels, 18:9 ratio (~302 ppi density)

Platform

OS: Android 10
Chipset: Mediatek MT6761 Helio A22 (12 nm)
CPU: Quad-core 2.0 GHz Cortex-A53
GPU: PowerVR GE8320

Memory

Card slot: microSDXC (dedicated slot)
Internal: 32GB 3GB RAM

Main Camera

Single: 13 MP, f/2.2, (wide)
Features: LED flash
Video: Yes

Selfie camera

Single: 8 MP
Video: Yes

Sound

Loudspeaker: Yes
3.5mm jack: Unspecified

Comms

WLAN: Wi-Fi 802.11 a/b/g/n
Bluetooth: 4.2, A2DP
Positioning: GPS, GLONASS, GALILEO, BDS
NFC: No
Radio: Unspecified
USB: USB Type-C

Features

Sensors: Accelerometer, gyro, proximity, compass

Battery

Type: Li-Ion 3000 mAh, non-removable

Misc

Colors: Red/Black, Orange/Black

Other Cubot phones like the KingKong Mini 2