How to reset or factory restore Cubot Note 7 device?
The Cubot Note 7 device allows you to perform a factory reset, which will erase all data and settings on the device, restoring it to its original state. Here are the most common and recommended ways to reset or factory restore a Cubot Note 7 device:
Method 1: Using the Volume buttons
1. Power off your Cubot Note 7 device.
2. Press and hold the Volume up button, the Power button, and the Home button simultaneously.
3. Release the Power button, then release the Volume up button and the Home button.
4. Wait for the recovery menu to appear on your device's screen.
5. In the recovery menu, select "Wipe data/factory reset".
6. When prompted, select "Yes, delete all user data" and confirm your selection.
7. Wait for the device to wipe all data and settings, then reboot the device.
Method 2: Using the Bootloader menu
1. Open a computer and connect your Cubot Note 7 device to it using a USB cable.
2. Download and install the relevant USB driver for your device.
3. Open a command prompt on your computer and navigate to the folder where the One Click Volume Flash Tool contains your Cubot Note 7's firmware file.
4. Run the One Click Volume Flash Tool, then select your firmware file and "SD Card" as the device type.
5. Select "Fastboot Mode" as the device type and enter the VIN number of your device.
6. Wait for the tool to flash the new firmware on your device.
7. Once the flashing is complete, disconnect your device from the computer and press and hold the Volume up button, the Power button, and the Home button simultaneously.
8. Release the Power button, then release the Volume up button and the Home button.
9. Wait for the recovery menu to appear on your device's screen.
10. In the recovery menu, select "Wipe data/factory reset".
11. When prompted, select "Yes, delete all user data" and confirm your selection.
12. Wait for the device to wipe all data and settings, then reboot the device.
Method 3: Using the Recovery Menu
1. Power off your Cubot Note 7 device.
2. Press and hold the Volume up button, the Power button, and the Home button simultaneously.
3. Release the Power button, then release the Volume up button and the Home button.
4. Wait for the recovery menu to appear on your device's screen.
5. In the recovery menu, select "Wipe data/factory reset".
6. When prompted, select "Yes, delete all user data" and confirm your selection.
7. Wait for the device to wipe all data and settings, then reboot the device.
It is recommended to back up important data and settings before performing a factory reset, as all data will be erased from your device. It is also recommended to perform a factory reset only as a last resort, as it will erase all data on your device, including important apps and settings that you may not be able to recover.
