How to reset or factory restore Cubot Note 20 Pro device?
You can factory reset the Cubot Note 20 Pro device using one of these methods:
Method 1: Via Recovery Mode
1. Enable USB debugging on your computer by going to Settings > Developer options and switching on USB debugging.
2. Connect your Cubot Note 20 Pro device to your computer using a USB cable.
3. Install the latest version of Android SDK on your computer.
4. Go to Settings > About phone, and note down the Build number.
5. Go to Settings > System > System update and tap on Custom recovery image.
6. Select the recovery image file and wait for the device to reboot.
7. Once the device boots into recovery mode, use the Volume and Power buttons to navigate to and select "Wipe data/factory reset".
8. Confirm the actions and wait for the device to reset.
Method 2: Using Hardware Buttons
1. Turn off your Cubot Note 20 Pro device.
2. Press and hold the Volume Up button, Power button, and Home button simultaneously for 10 seconds.
3. Release the buttons and wait for the recovery menu to appear.
4. Use the Volume and Power buttons to navigate to and select "Wipe data/factory reset".
5. Confirm the actions and wait for the device to reset.
Method 3: Using a PC
1. Connect your Cubot Note 20 Pro device to your computer using a USB cable.
2. Install the latest version of Android SDK on your computer.
3. Install the Android Device Manager on your computer.
4. Go to Settings > Developer options and switch on USB debugging.
5. Open the Android Device Manager on your computer.
6. Select your Cubot Note 20 Pro device, click on "Properties" and then "Drivers".
7. Ensure you have the latest drivers installed and click "OK".
8. Click "Reset device" and confirm the actions.
9. Wait for the device to reset.
It is recommended to back up your personal data before performing a factory reset to avoid data loss.
