How to reset or factory restore Celkon C67+ device?
If you want to reset or factory restore a Celkon C67+ device, there are several methods that you can use. However, before performing any of these methods, make sure to back up all important data, as factory resetting the device will erase all files and data on the device.
Method 1: Using the hardware buttons
To reset or factory restore the Celkon C67+ device using the hardware buttons, follow these steps:
1. Press and hold the power button and the volume up button together for 10-15 seconds, until the Celkon logo appears on the screen.
2. Release the buttons and wait for the device to enter the recovery menu.
3. Once the recovery menu appears, use the volume buttons to highlight the "wipe data/factory reset" option and press the power button to select it.
4. Wait for the device to complete the reset process, which may take several minutes. Once it's done, the device will reboot automatically.
Method 2: Using a computer
You can also reset or factory restore the Celkon C67+ device using a computer. Here are the steps to do generate a custom recovery image using the Celkon USB driver, and then flash it onto your device:
1. Download the Celkon USB driver from the internet and install it on your computer.
2. Connect your Celkon C67+ device to your computer using a USB cable.
3. Open the Custom Recovery Image Generator (CROM) program on your computer, and select the Celkon C67+ device from the device list.
4. Choose the recovery image to create, and click on "Build".
5. Wait for the recovery image to be generated, which may take several minutes.
6. Once the recovery image is generated, disconnect your device from the computer and remove the USB cable.
7. Press and hold the power button and the volume down button together until the Celkon logo appears on the screen.
8. Release the buttons and wait for the device to enter the recovery menu.
9. Use the volume buttons to highlight the "Install" option and press the power button to select it.
10. Select the recovery image you just generated, and wait for the device to complete the installation process.
11. Once the installation is complete, reboot the device to access the new recovery image.
Method 3: Using a custom recovery
It's also possible to use a custom recovery to reset or factory restore the Celkon C67+ device. Here are the steps to do that:
1. Download the custom recovery image you want to use from the internet and store it on your computer.
2. Connect your Celkon C67+ device to your computer using a USB cable.
3. Use a custom recovery tool like Odin or SP FlashTool on your computer, and flash the custom recovery image onto your device.
4. Once the custom recovery image is flashed, reboot the device and go into the custom recovery menu.
5. Use the custom recovery menu to wipe data/factory reset the device as needed.
It's important to note that some of these methods may void your device's warranty, so use them at your own risk. Also, make sure to always choose the correct recovery image or custom recovery for your device, as using the wrong one can cause damage to your device.
