How to reset or factory restore Celkon C297 device?
There are several ways to reset or factory restore a Celkon C297 device, including:
1. SoftReset: This method involves performing a soft reset, which is a process that resets your device to its default settings without losing any data. To perform a soft reset on your Celkon C297 device, follow these steps:
Step 1: Turn off your device by pressing and holding the power button until the device turns off.
Step 2: While holding down the power button, press and hold the home button simultaneously.
Step 3: Release both buttons after about 15 seconds.
Step 4: Wait for your device to turn back on. The device will have default settings and you can now install the operating system.
2. HardReset: This method involves performing a hard reset, which is a process that erases all data and settings and restarts the device as factory settings. To perform a hard reset on your Celkon C297 device, follow these steps:
Step 1: Turn off your device by pressing and holding the power button until the device turns off.
Step 2: Connect your device to a computer using a USB cable.
Step 3: On your computer, drill into the Celkon device’s command prompt. The command prompt can be found by right-clicking on the Windows or Type start menu and typing “An elevated command prompt”.
Step 4: Type in “erasealluserdata” and press Enter.
Step 5: Wait for the system to confirm the reset operation, then press Enter again.
Step 6: The device will begin to reset and erase all data and settings.
Step 7: Wait for the reset to finish. Once it is complete, the device will restart and have default settings.
It's important to note that these methods will erase all data on the device, so it's important to back up any important data before performing a reset. Additionally, it's always recommended to use the latest official firmware of your device before performing any type of reset.
