How to reset or factory restore Celkon CT-910+ device?
The Celkon CT-910+ is a smartphone that runs on the Android operating system. If you need to reset or factory restore the device, there are a few different methods you can use.
Method 1: Using the Recovery Mode
1. Turn off your Celkon CT-910+ device.
2. Press and hold the Volume Up button, the Volume Down button, and the Power button at the same time until the phone enters recovery mode.
3. Once in recovery mode, use the Volume buttons to navigate to the "Wipe data/factory reset" option and select it using the Power button.
4. A confirmation screen will appear. Select "Yes — delete all user data" to proceed.
5. Wait for the device to reboot.
Method 2: Using the Update Assistant
1. Open the Update Assistant app on your Celkon CT-910+ device.
2. Tap on the "Set device to factory data" option.
3. A confirmation screen will appear. Select "Yes — delete all user data" to proceed.
4. Wait for the device to reset to its factory settings and reboot.
Method 3: Using ADB (Android Debug Bridge)
To use ADB, you will need to have the Android SDK installed on your computer and the appropriate drivers for your CelkonCT-910+ device. Once you have these installed, follow these steps:
1. Connect your CelkonCT-910+ device to your computer using a USB cable.
2. Open a command prompt on your computer and navigate to the directory where ADB is installed.
3. Type "adb devices" to ensure that the ADB utilities can communicate with your device.
4. Type "adb reboot recovery" to reboot the device into recovery mode.
5. Once in recovery mode, select "Wipe data/factory reset" and confirm your choice.
6. The device will reboot and rest to its factory settings.
It is important to note that resetting or factory restoring your device will erase all of your data and settings, as well as any customizations you may have made on the phone. It is recommended to back up your important data before performing a reset or factory restore.
