How to reset or factory restore Celkon C7030 device?
To reset or factory restore a Celkon C7030 device, you can follow the steps below:
1. Backup your files: Before resetting the device, make sure to backup all of your important files as they will be stored in a fresh state when the device is factory reset.
2. Boot into recovery mode: Bring the device up to the emergency recovery page by pressing and holding the home and power buttons at the same time until the device vibrates. Once this happens, release the two buttons, and the device will enter the following screen:
3. Select "Backup and Reset": Scroll through the menu displayed on the screen using the volume buttons until you reach the "Backup and Reset" option.
4. Select "Reset Device": Once you have selected the "Backup and Reset" option, scroll through the menu again until you reach the "Reset Device" option.
5. Confirm reset: A warning message will appear, and you will be prompted to confirm the reset. Press the "Yes" button to proceed.
6. Wait for the device to reset: Once you have confirmed the reset, the device will begin the process. This could take up to ten minutes.
7. Restart the device: After the reset is complete, you will see the Celkon logo on the screen. Wait for the device to start up and set up as new.
It is important to note that a factory reset will delete all data on the device, including settings, apps, messages, and other files that were saved. Therefore, it is recommended that you backup your important data before attempting to reset the device.
Alternatively, you can contact Celkon customer service for assistance in resetting your device. They may be able to provide additional support or guidance if necessary.
