ZTE Warp 4G

Home/ ZTE/ Phones/ Warp 4G

Table of Contents

Summary

ZTE Warp 4G Price

At the time of it's release in 2013, September, the manufacturer's retail price for a new ZTE Warp 4G was about 150 EUR.

The retail price of a new or used/second hand ZTE Warp 4G varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of ZTE Warp 4G across different regions, markets and countries.

Frequently Asked Questions(FAQs)

How to reset or factory restore ZTE Warp 4G device?

If you have a ZTE Warp 4G device and are experiencing issues with it, or just want to start fresh with a clean slate, there are several ways to reset or factory restore your device. In this explanation, we will outline the most common and recommended ways to perform a reset or factory restore on a ZTE Warp 4G device. Method 1: Using the Home Button * Turn off the device * Press and hold the Home button until the recovery menu appears * Use the Volume buttons to navigate to "Wipe data/factory reset" * Press the Power button to select "Yes—delete all user data" * Wait for the device to reset Method 2: Using the Recovery Menu * Turn off the device * Press and hold the Power button until the recovery menu appears * Use the Volume buttons to navigate to "Wipe data/factory reset" * Press the Power button to select "Yes—delete all user data" * Wait for the device to reset Method 3: Using the Backup and Restore App * Open the "Backup and Restore" app on your ZTE Warp 4G device * Tap on "Factory data reset" * Confirm your decision by tapping on "Yes—factory data reset will erase all app data and settings" * Wait for the device to reset Method 4: Using a Computer * Connect your ZTE Warp 4G device to a computer using a USB cable * Install the ZTE PC Tools software on your computer * Open the "Toolbox" within the ZTE PC Tools software * Click on "Flash Device" * Select your ZTE Warp 4G device from the list * Choose the appropriate firmware for your device * Click "Start" to begin the flashing process * Wait for the device to reset and reboot Note: Before performing a reset or factory restore, be sure to back up any important data or settings, as they will be lost during the process. Additionally, be cautious when using the "Backpack" option in the recovery menu, as it can erase all data on your device without the ability to recover it.

What is the battery capacity of ZTE Warp 4G?

The ZTE Warp 4G has a battery capacity of 2000 mAh

What type of SIM card does ZTE Warp 4G use?

The ZTE Warp 4G uses a micro-SIM card

What is the display size of ZTE Warp 4G?

The ZTE Warp 4G has a display size of 4.5 inches

Specifications

Network

Technology: CDMA / EVDO / LTE
2G bands: CDMA 800 / 1900
3G bands: CDMA2000 1xEV-DO
4G bands: LTE (unspecified)
Speed: EV-DO Rev.A 3.1 Mbps, LTE

Launch

Announced: 2013, September. Released 2013, September
Status: Discontinued

Body

Dimensions: 132.1 x 66 x 10.4 mm (5.20 x 2.60 x 0.41 in)
Weight: 127.6 g (4.48 oz)
SIM: Yes

Display

Type: IPS LCD
Size: 4.5 inches, 55.8 cm2 (~64.0% screen-to-body ratio)
Resolution: 720 x 1280 pixels, 16:9 ratio (~326 ppi density)
Protection: Scratch-resistant glass