How to reset or factory restore ZTE S302 device?
There are multiple ways to reset or factory restore a ZTE S302 device depending on the situation. Some of the most common and recommended methods are as follows:
Method 1: Using the Hardware Keys to Reset the Device
Step 1: Turn off your ZTE S302 device by pressing and holding the Power button until the device turns off.
Step 2: Press and hold the Power and Volume Down buttons at the same time until the device turns on and the ZTE logo appears on the screen.
Step 3: Release the Volume Down button and press and hold the Power button again until the "Wipe data/factory reset" option appears on the screen.
Step 4: Select the option using the Volume buttons and press the Power button to confirm.
Step 5: Wait for the factory reset process to complete. This may take a few minutes.
Step 6: Once the reset is complete, the device will automatically restart in fast boot mode.
Method 2: Using the Backup and Restore Tool
Before starting the factory reset process, make sure to backup all your data and settings from the device to your computer. To do this, follow the steps below:
Step 1: Install the ZTE Backup and Restore tool on your computer by downloading it from the official ZTE website.
Step 2: Connect your ZTE S302 device to your computer using a USB cable.
Step 3: Launch the ZTE Backup and Restore tool on your computer and select "Backup phone data" from the main menu.
Step 4: Select the type of backup you want to create (Full backup or Selective backup) and click on the backup button to begin the backup process.
Step 5: Once the backup process is complete, disconnect your device from the computer and turn off the device.
Step 6: Turn on the device and connect it back to the computer again.
Step 7: Launch the ZTE Backup and Restore tool on the device and select "Restore phone data" from the main menu.
Step 8: Select the backup file you created earlier and click the restore button to begin the restoration process.
Step 9: Wait for the restoration process to complete from the device.
Method 3: Using the Recovery Mode
The recovery mode is a bootloader mode that allows you to perform advanced settings and restore the device to its factory default settings. To access the recovery mode, follow the steps below:
Step 1: Turn off your ZTE S302 device and wait for it to turn on.
Step 2: Press and hold the Power and Volume Down buttons at the same time until the device turns on and the ZTE logo appears on the screen.
Step 3: Release the Volume Down button and press and hold the Power button again until the Recovery mode menu appears on the screen.
Step 4: Select "Wipe data/factory reset" from the menu and press the Power button to confirm.
Step 5: Wait for the factory reset process to complete. This may take a few minutes.
Step 6: Once the reset is complete, the device will automatically restart in the recovery mode.
Step 7: Once you are in the recovery mode, you can select "Install from SD card" and browse to the location where you saved the ZTE recovery image. Select the recovery image and install it on the device.
Note: Before performing any of these methods, make sure to backup all your important data and settings from the device to your computer or another device, as a factory reset will erase all data and settings from the device. Also, make sure to follow all instructions carefully to avoid any potential damage to the device.
