How to reset or factory restore ZTE F912 device?
Sure, here are the most common ways to reset or factory restore a ZTE F912 device:
Method 1: Using the recovery menu
1. Turn off your ZTE F912 device.
2. Press and hold the volume up button and the power button simultaneously for 10 seconds until the recovery menu appears.
3. Select "Wipe data/factory reset" using the volume up or down buttons.
4. Confirm the reset by selecting "Yes" or "OK".
5. Wait for the device to reset and the recovery menu to appear again.
6. Select "Reboot system" and wait for the device to restart.
Method 2: Using a computer
1. Download the ZTE F912 drivers from ZTE's official website.
2. Connect your ZTE F912 device to your computer using a USB cable.
3. Install the drivers on your computer.
4. Open a command prompt on your computer and navigate to the directory where the ZTE F912 drivers are installed.
5. Type the following command: "smscickit cgoto recovery 0x12345678" (This command will take the device into recovery mode.)
6. Once in recovery mode, select "Wipe data/factory reset" and restart the device.
7. When the device restarts for the first time, select "Accept terms and conditions" and then select "Language".
8. Sign in to your Google account if you have one.
9. Select "Create a new account" if you don't have a Google account.
10. Follow the on-screen instructions to set up your device.
Method 3: Using four buttons
1. Turn off your ZTE F912 device.
2. Press and hold the volume up button and the power button simultaneously for 10 seconds until the recovery menu appears.
3. Release both buttons and then press and hold the volume down button and the power button simultaneously for 10 seconds.
4. Release both buttons and then press and hold the volume up button and the power button simultaneously for 10 seconds until the recovery menu appears again.
5. Select "Wipe data/factory reset" using the volume up or down buttons.
6. Confirm the reset by selecting "Yes" or "OK".
7. Wait for the device to reset and the recovery menu to appear again.
8. Select "Reboot system" and wait for the device to restart.
