How to reset or factory restore Yezz Andy 3.5EI3 device?
The Yezz Andy 3.5EI3 smartphone is a popular option for users looking for an affordable device with a long battery life. However, there may be times when you need to reset or factory restore your device to its original state. Here are the most common and recommended ways to reset or factory restore a Yezz Andy 3.5EI3 device:
Method 1: Using the Volume Buttons
1. Turn off your device by holding the power button down for 10 seconds.
2. Press and hold the Volume Up button while the power button is pressed down.
3. Release both buttons when the Yezz logo appears on the screen.
4. Press and hold the Volume Down button while the Volume Up button is pressed down.
5. When the "Wipe data/factory reset" screen appears, use the Volume Down button to select it, then press the Volume Up button to confirm.
6. Wait for the device to reset completely. This can take several minutes.
7. Once the device has finished resetting, press and hold the Power button until the device turns back on.
Method 2: Using Recovery Mode
1. Turn off your device by holding the power button down for 10 seconds.
2. Connect your device to your computer using a USB cable.
3. Open a command prompt on your computer and navigate to the folder where the Yezz recovery image is stored.
4. Use the "fastboot flash recovery recovery.img" command to flash the recovery image onto your device.
5. Once the recovery image has been flashed, disconnect your device from the computer.
6. Turn on your device by holding the Volume Up button and the Power button down simultaneously.
7. Once the recovery menu appears, select "Wipe data/factory reset" and confirm your selection.
8. Wait for the device to reset completely. This can take several minutes.
9. Once the device has finished resetting, select "Reboot system" from the recovery menu to turn your device back on.
Method 3: Using the Emergency Software
1. Turn off your device by holding the power button down for 10 seconds.
2. Press and hold the Volume Up button while connecting your device to your computer with a USB cable.
3. When the Yezz logo appears on the screen, press and hold the Volume Up button until the recovery menu appears.
4. Select "Wipe data/factory reset" from the recovery menu and confirm your selection.
5. Wait for the device to reset completely.
6. Once the device has finished resetting, select "Reboot system" from the recovery menu to turn your device back on.
It's important to note that factory resetting your device will erase all data on your device, including any important files and settings. It's recommended to backup your data before resetting your device to its original state.
