How to reset or factory restore verykool i126 device?
The i126 is an older model of a mobile phone brand named VeryKool. While it may still be functional, it is important to note that restoring it to factory settings may cause you to lose all your data and personal settings. Here are the most common and recommended ways to reset or factory restore a VeryKool i126 device:
1. Resetting to default settings:
To reset the VeryKool i126 to its default settings, follow these steps:
* Turn off your phone.
* Press and hold the Home button and the Volume up button at the same time for about 10 seconds.
* Release the buttons.
* The phone should reboot in Recovery mode.
* Once the recovery menu appears, select "Wipe Data/Factory Reset" using the volume keys to navigate.
* Confirm the action by selecting "Yes" or "OK".
* Wait for the phone to reset to default settings and reboot.
2. Using the bootloader:
Another way to reset your VeryKool i126 is to use the bootloader. This method is more technical and requires a computer and special software. Here's how you can do it:
* Connect the VeryKool i126 to your computer using a USB cable.
* Download and install the appropriate software on your computer.
* Folder with the phone drivers and firmware, select the "i126\_Firmware file" and replace the "Firmware.fbl file" with your firmware.
* Run the bootloader on your computer.
* Connect your phone to the computer.
* Press the "Voice Down" button on your phone to enter the bootloader.
* Select "Load Firmware" and select the firmware file you created in step 3.
* Wait for the phone to reboot and reset to default settings.
It is worth noting that using the bootloader may cause damage to your phone, so use it with caution and only if you are experienced with this method.
