How to reset or factory restore verykool i122 device?
To reset or factory restore a VeryKool i122 device, you can follow these methods:
Method 1: Using the Power Button and Volume Down Button
1. Press and hold the power button for a few seconds until the device turns off.
2. Release the power button, then press and hold the volume down button and the power button simultaneously.
3. Keep both buttons pressed until the device turns off and enters recovery mode.
4. In the recovery mode, select the "Factory Data Reset" option using the volume buttons and press the power button to select it.
5. Confirm the factory data reset by selecting "Yes - Delete all user data/software" and press the power button to confirm.
6. The device will now begin the factory reset process, which may take some time to complete.
Method 2: Using the Android Debug Bridge (ADB)
1. Connect your VeryKool i122 device to your computer using a USB cable.
2. Open the command prompt or terminal on your computer.
3. Make sure that ADB is installed on your computer. If not, you can download it from the official Google website.
4. Navigate to the directory where you have your VeryKool i122 device connected, and make sure that your USB debugging is enabled on the device.
5. Type the following command in the command prompt/terminal: `adb reboot recovery`.
6. This command will reboot your device into recovery mode.
7. In the recovery mode, select the "Factory Data Reset" option using the volume buttons and press the power button to select it.
8. Confirm the factory data reset by selecting "Yes - Delete all user data/software" and press the power button to confirm.
9. The device will now begin the factory reset process, which may take some time to complete.
It's important to note that factory resetting will erase all data on the device, including contacts, messages, apps, and other personal information. It is recommended to back up your data before attempting a factory reset, unless you are sure you want to start with a clean slate.
