How to reset or factory restore verykool i115 device?
To reset or factory restore a Verykool i115 device, there are a few methods that you can use. Below are the most common and recommended ways:
1. Soft Reset
A soft reset is a simple process that reboots the device without losing any data. To perform a soft reset on a Verykool i115, follow these steps:
* Press and hold the power button and the * button simultaneously.
* Release both buttons after 5-10 seconds.
* The device will reboot and you can now use it normally.
2. Bootloader Update
If you want to update the bootloader of your Verykool i115, you can use a bootloader update. A bootloader update will erase all user data on the device and install the latest firmware. To perform a bootloader update on a Verykool i115, follow these steps:
* Download the bootloader update file from the official Verykool website.
* Place the bootloader update file on your computer's desktop.
* Connect your Verykool i115 to your computer using a USB cable.
* Open a command prompt and navigate to the directory where the bootloader update file is located.
* Run the following command to flash the bootloader:
```
fastboot flash bootloader bootloader.img
```
* Wait for the bootloader update to complete.
* Reboot your device and you can now update the firmware.
3. Hard Reset (Wipe Data/Factory Reset)
If you want to completely reset your Verykool i115 and start from scratch, you can perform a hard reset. A hard reset erases all user data on the device, including the bootloader, and restores the device to its original factory settings. To perform a hard reset on a Verykool i115, follow these steps:
* Press and hold the power button and the volume down button simultaneously.
* Release both buttons after 5-10 seconds.
* The device will enter recovery mode.
* In recovery mode, select "Wipe data/factory data" and confirm your selection.
* The device will erase all data and reboot.
* When the device boots up, you will be prompted to set up the device as if it were new.
Note: Performing a hard reset will erase all user data on the device, including any important files or information. It is recommended to back up your data before performing a hard reset.
