How to reset or factory restore Unnecto Shell device?
The most common and recommended ways to reset or factory restore an Unnecto Shell device are as follows:
1. Using the Unnecto software: Unnecto is a third-party software that offers a more user-friendly interface for resetting or factory restoring your device. To use Unnecto, follow these steps:
a. Install Unnecto software on your computer.
b. Connect your device to your computer using a USB cable.
c. Open the Unnecto software and select your device from the list of connected devices.
d. Since your device is locked, you need to access the recovery mode. Do this by holding the Volume Up and Power buttons simultaneously until the recovery menu appears.
e. Select the "Recovery" option to enter the recovery mode.
f. Finally, select the "Restore" option and use the Unnecto software to restore your device to its factory settings.
1. Using the Factory Reset function: Most devices come with a built-in Factory Reset feature that allows you to restore your device to its factory settings. To use this feature, follow these steps:
a. Turn off your device.
b. Press and hold the Volume Up and Power buttons together until the recovery menu appears.
c. Select the "Factory Reset" option.
d. Select "Yes-Yes" to confirm your decision to reset your device.
e. The device will begin to reset and may take several minutes to complete. Once it finishes, your device will return to the initial setup screen, allowing you to set it up as a new device.
1. Using Bootloader commands: You can also use the bootloader commands to reset your device to its factory settings. To do this, follow these steps:
a. Using a USB cable, connect your device to your computer.
b. Open a command prompt or terminal window on your computer.
c. Type in the following command to enter the bootloader:
`fastboot devices`
d. This command will display a list of connected devices. Find the name of your device on the list and note it down.
e. Type in the following command to enter the recovery mode:
`fastboot reboot recovery`
f. This command will reboot your device into the recovery mode.
g. From here, you can select the "Factory Reset" option and confirm your decision to reset the device.
It's important to note that using any of these methods will erase all data on your device, so make sure to backup any important information before attempting a reset.
