Telit GM 410

Home/ Telit/ Phones/ GM 410

Table of Contents

Summary

Telit GM 410 Price

The retail price of a new or used/second hand Telit GM 410 varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Telit GM 410 across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the maximum data rate of the Telit GM 410?

The maximum data rate of the Telit GM 410 is up to 14.4 Mbps (downlink) and 5.76 Mbps (uplink).

How to reset or factory restore Telit GM 410 device?

Telit GM 410 device can be reset or factory restored by following these most common and recommended ways: Method 1: Using the Telit Web Manager (TWM) 1. Log in to the Telit Web Manager (TWM). 2. Navigate to the Device Management section from the main menu. 3. Select the device you wish to reset/factory restore from the list of available devices. 4. Click on the Reset/Factory Restore button. 5. Follow the on-screen instructions to proceed with the reset/factory restore process. Method 2: Using a USB cable 1. Connect the device to your computer using a USB cable. 2. Open the device driver settings on your computer. 3. Select Device Manager and find the Telit GM 410 device in the list of connected devices. 4. Right-click on the device and select Properties. 5. In the Properties window, select the firmware tab. 6. Click on the Check Update button and follow the on-screen instructions to download and install the latest firmware. 7. After the firmware is installed, disconnect the device from the computer. 8. Reset the device by pressing and holding the reset button for a few seconds until the LED light blinks rapidly. 9. Release the reset button and the device will restart with the default settings. Note: This method can brick the device if the reset process is not executed correctly. It is recommended to follow the manufacturer's instructions for this method. Method 3: Using the Telit Reset and Restore Utility 1. Download and install the Telit Reset and Restore Utility from the Telit website. 2. Run the utility and connect your device to the computer using a USB cable. 3. Select the device from the list of available devices. 4. Follow the on-screen instructions to proceed with the reset/factory restore process. 5. After the reset/factory restore is completed, disconnect the device from the computer. Note: This method can also brick the device if the reset process is not executed correctly. It is recommended to follow the manufacturer's instructions for this method.