How to reset or factory restore Telit GM 710 device?
When a Telit GM 710 device is experiencing errors or not functioning properly, the recommended method to reset or factory restore it, depends on the situation. Here are the most common and recommended methods:
1. Resetting to default settings:
- Turn off the device by pressing the power button on the device
- Press and hold the power button for about 10 seconds
- Release the power button and wait for the device to restart
- Once the device has restarted, it will be reset to default settings
2. Hardware Reset:
- Turn off the device by pressing the power button on the device
- Unplug the device from the power source
- Press and hold the power button for about 10 seconds
- Release the power button and wait for the device to restart
- Once the device has restarted, the hardware reset will be complete
3. Factory Reset using PC:
- Connect the device to a computer with a USB cable
- Install the Telit device software on your PC
- Open the Telit Management Tools software and select ‘Firmware Update’
- Select ‘Download Bootloaders’ and click ‘Update’
- Wait for the update process to complete
- Once the update is complete, power off the device and reset it to default settings as described in method 1.
4. Over-the-Air (OTA) Update:
- Open the Telit Management Tools software and select ‘Firmware Update’
- Select ‘Download Bootloaders’ and click ‘Update’
- Wait for the update process to complete
- Once the update is complete, the device will be automatically reset to default settings.
It is important to note that after a factory reset, all data and configurations will be lost and need to be re-entered. Therefore, it is recommended to back up any important data before performing a factory reset or OTA update.
