Tecno Pop 1 Pro

Home/ Tecno/ Phones/ Pop 1 Pro

Table of Contents

Summary

Tecno Pop 1 Pro Price

The retail price of a new or used/second hand Tecno Pop 1 Pro varies widely depending on factors including availability, condition of device, your town or location and market demand. Click here to compare the price of Tecno Pop 1 Pro across different regions, markets and countries.

Frequently Asked Questions(FAQs)

What is the battery capacity of Tecno Pop 1 Pro?

The Tecno Pop 1 Pro has a 3000 mAh battery.

How to reset or factory restore Tecno Pop 1 Pro device?

To reset a Tecno Pop 1 Pro device, follow the steps below: Before you begin, make sure to back up any important data on your device. This will protect your data from being lost during the reset process. 1. Turn off the device: Press and hold the power button until the device turns off. 2. Remove the SIM card: If your device uses a SIM card, remove the card by inserting a paperclip into the SIM card tray and carefully removing the card. 3. Insert the SIM card removal pin: If your device requires a SIM card removal pin, insert the pin into the SIM card tray to remove the pin. 4. Press the volume up button and home button: While the device is turned off, press and hold the volume up button and the home button simultaneously until the device turns on. 5. Wait for the reset menu to appear: After a few seconds, the reset menu should appear. It may take several minutes to appear. 6. Select "Wipe data/factory data": Using the volume up button, select "Wipe data/factory data" (or a similar option) from the reset menu. 7. Confirm the wipe data action: You will be asked to confirm that you want to wipe data. Use the volume up button to select "Yes" (or a similar option) and then press the home button to confirm the action. 8. Wait for the device to reset: After confirming the wiping of data, the device will begin to reset itself. This can take several minutes, depending on the device. 9. Reinsert the SIM card: Once the reset process is complete, reinsert the SIM card (if necessary) and reinsert the SIM card removal pin (if necessary). 10. Turn on the device: Press and hold the power button until the device turns on. You should see the reset menu again. This time, select "Reboot system now" (or a similar option) to turn on the device with a clean slate. Note that resetting your device to its factory settings will erase all of your data, including contacts, photos, messages, and settings. Therefore, it is recommended to back up your data before resetting your device. Additionally, if you are experiencing issues with your device, it is recommended to consult a professional for assistance.

What is the display size of Tecno Pop 1 Pro?

The Tecno Pop 1 Pro has a 5.5 inch display.

What is the processor of Tecno Pop 1 Pro?

The Tecno Pop 1 Pro is powered by a Quad-core 1.3 GHz Cortex-A53 processor.

Specifications

Network

Technology: GSM / HSPA
2G bands: GSM 900 / 1800 - SIM 1 & SIM 2
3G bands: HSDPA 2100
Speed: HSPA 21.1/5.76 Mbps

Launch

Announced: 2018, June
Status: Available. Released 2018, June

Body

Dimensions: 151.5 x 71.9 x 8.5 mm (5.96 x 2.83 x 0.33 in)
Weight: 140 g (4.94 oz)
SIM: Dual SIM

Display

Type: TFT
Size: 5.45 inches, 76.7 cm2 (~70.4% screen-to-body ratio)
Resolution: 480 x 960 pixels, 18:9 ratio (~197 ppi density)
Protection: NEG T2X