How to reset or factory restore Tecno Pop 1 device?
If you want to reset or factory restore a Tecno Pop 1 device, there are two common methods: using the hardware keys, or using a computer with the Tecno PC Suite tool.
Method 1: Using Hardware Keys
1. Turn off your Tecno Pop 1 device by pressing and holding the power button for 5-10 seconds until the power off screen appears.
2. Press and hold the power button and the volume up button at the same time for 10-15 seconds. You should see the Tecno logo and the recovery menu "SPLASH" or "Fastboot" appear on the screen.
3. Use the volume keys to navigate to "FACTORY DATA RESET" or "WIPE DATA/factory data reset".
4. Press the power button to select and confirm the option.
5. The device will now restart and reset to its factory settings. This process may take several minutes to complete.
Method 2: Using Tecno PC Suite
1. Download and install the Tecno PC Suite tool on your computer from the Tecno website.
2. Connect your Tecno Pop 1 device to your computer using a USB cable and make sure the PC Suite is detected and synced with the device.
3. Back up any important data from your device before proceeding.
4. Next, go to the "Tecno Dialog" option within the PC Suite and select "Stock ROM Flashing.
5. Browse to the "Tecno ROM" folder on your computer and select the appropriate ROM file for your device.
6. Follow the on-screen instructions to flash the ROM onto your device.
7. After the ROM has been successfully flashed, the device will restart and reset to its factory settings.
Note: Using the Tecno PC Suite method requires a computer with a USB connection and the appropriate Tecno ROM file.
It is recommended to use the hardware keys method to reset or factory restore your Tecno Pop 1 device as it is more reliable and can be done without a computer. However, if you are using a computer with the Tecno PC Suite tool, make sure to take backup of your important data before proceeding.
