How to reset or factory restore Spice Mi-500 Stellar Horizon device?
The Spice Mi-500 Stellar Horizon is a smartphone developed by Spice Technology. If you need to reset or factory restore your Spice Mi-500 Stellar Horizon device, here are the most common and recommended ways to do it:
1. Using TeamWin Recovery:
You need a PC that has TeamWin Recovery installed. You also need a USB cable to connect your smartphone to the computer. It's important to charge your smartphone to at least 50% before starting the process.
Here are the steps:
* Turn off your smartphone completely.
* Connect your smartphone to your PC using a USB cable.
* Drivers for your device should be automatically detected. If not, you can download them from TeamWin.
* Go to the TeamWin Recovery section on their website.
* Download and install TeamWin Recovery on your device.
* Reboot your device into recovery mode by pressing and holding the power button and the volume up button simultaneously.
* It may take a few minutes for the recovery menu to appear.
* Select "Reboot System Now" and let your smartphone reboot.
2. Using Spice Original recovery Process:
You need a PC that has the Spice Original Recovery app installed. You also need a USB cable to connect your smartphone to the computer. It's important to charge your smartphone to at least 50% before starting the process.
Here are the steps:
* Turn off your smartphone completely.
* Connect your smartphone to your PC using a USB cable.
* Drivers for your device should be automatically detected. If not, you can download them from Spice.
* Go to the Spice Original Recovery section on their website and download the relevant recovery package for your device.
* Install the Spice Original Recovery app on your PC.
* Reboot your device into recovery mode by holding the power button down for 10 seconds, then pressing and holding the power and home buttons simultaneously.
* The recovery menu will appear. Select "Install recovery from SD card" and the recovery package you downloaded earlier.
3. Using Jump Bootloader:
Jump Bootloader is a powerful tool that can help you jump into bootloader mode, which means that you can flash system images and perform other advanced operations on your device.
Here are the steps:
* First, you need to enable USB debugging on your device. Navigate to Settings > About phone, then tap on "Build number" multiple times until you enter the developer options. Enable USB debugging and then reboot your device.
* Download and install Jump Bootloader on your PC. Look for the correct download link on Jump Bootloader's website, as it may vary based on your device.
* Once Jump Bootloader is installed, connect your device to your PC using a USB cable.
* Open a command prompt window and enter "adb devices" to ensure that your device is recognized.
* Enable fast boot on your device. Go to the developer options, under "OEM locking settings", select "Unlock bootloader". Then reboot your device into fast boot mode.
* In fast boot mode, run the "jump bootloader" command using ADB.
* You can advanced ROM customization, flashing bootloaders and more using Jump bootloader
Note: It is important to note that, factory resetting a device will erase all your data and settings, so it is recommended that you backup your data before proceeding to perform a factory reset. Also, make sure you are familiar with the process and steps before attempting a factory reset.
