How to reset or factory restore Spice M-5665 T2 device?
To reset or factory restore a Spice M-5665 T2 device, there are several methods that can be used. The most common and recommended ways are as follows:
Method 1: Using the Spice testing terminals:
1. Turn off the device.
2. Connect the device to the testing terminals using the USB cable.
3. Press and hold the "Power+" key and "Power-Off" key for 20 seconds until the device boots into System Mode.
4. Select "Settings" and then "Storage."
5. Select "Erase All."
6. Select "Erase All" and confirm the selection.
7. After the device is erased, press the "Power+" key and "Power-Off" key again to reboot into Normal Mode.
Method 2: Using the command-line interface:
1. Connect the device to a computer using the USB cable.
2. Open a command prompt on the computer.
3. Type "c:\" to change to the root directory of the device.
4. Type "ipconfig /forceip'" to obtain a new IP address.
5. Type "cd behaviour/" to navigate to the behavior directory.
6. Type "rm *\*" to delete all files and folders in the directory.
Method 3: Using the recovery mode:
1. Connect the device to the testing terminals using the USB cable.
2. Turn off the device and press and hold the "Power+" key and "Power-Off" key for 20 seconds until the device boots into System Mode.
3. Press the "Power+" key and "Power-Off" key a second time to enter recovery mode.
4. Select "Wipe Data" and then "Yes" to erase all data on the device.
5. After the data is erased, press the "Power+" key and "Power-Off" key again to reboot into Normal Mode.
It's important to note that it's recommended to always backup important data before resetting or factory restoring any device. Factory restoring should be done only as a last resort, when all other options have failed.
