What are the specifications of Spice Mi-451 Smartflo Poise
1.3 GHz Dual Core Processor, 512 MB RAM, 4 GB Internal Memory, 4.5 inch FWVGA Display, 5 MP Rear Camera, 0.3 MP Front Camera, 1400 mAh Battery
How to reset or factory restore Spice Mi-451 Smartflo Poise device?
There are different ways to reset or factory restore a Spice Mi-451 Smartflo Poise device. Here are some of the most common and recommended methods:
1. Using the Smartflo app:
o Open the Smartflo app on your phone.
o Remove the Smartflo water meter.
o Press and hold the "A" button on your Smartflo Smartflo water meter until the "MUSTERFLOW" icon starts flashing.
o Enter either "FFFF" or "0000" when prompted and press the "Enter" button.
o The Smartflo Smartflo water meter will start flashing rapidly after the first entry, indicating successful resetting.
o Replace the Smartflo Smartflo water meter on the wall.
o Open the Smartflo app and log in to resync your device.
2. Using the Smartflo Reverse button:
o Find the "Reverse" button on your Smartflo Smartflo water meter.
o Press and hold the "Reverse" button until the Smartflo Smartflo water meter starts flashing rapidly.
o Enter "FFFF" or "0000" when prompted and press the "Enter" button.
o The Smartflo Smartflo water meter will start flashing rapidly after the first entry, indicating successful resetting.
o Replace the Smartflo Smartflo water meter on the wall.
o Open the Smartflo app and log in to resync your device.
3. Using a manual reset:
o Unplug the Smartflo Smartflo water meter from its power source.
o Press and hold the "A" button on your Smartflo Smartflo water meter at the same time as the emergency shutoff button.
o Keep holding both buttons until the Smartflo Smartflo water meter stops flashing.
o Release both buttons and wait for the Smartflo Smartflo water meter to start flashing again.
o Enter "FFFF" or "0000" when prompted and press the "Enter" button.
o The Smartflo Smartflo water meter will start flashing rapidly after the first entry, indicating successful resetting.
o Replace the Smartflo Smartflo water meter on the wall and plug it back into its power source.
o Open the Smartflo app and log in to resync your device.
Note: In all cases, make sure to follow the instructions provided by the Spice support team or the manufacturer to avoid any potential damage to your Smartflo Smartflo water meter or device.
