How to reset or factory restore Spice Mi-349 Smart Flo Edge device?
If you need to reset or factory restore a Spice Mi-349 Smart Flo Edge device, there are several methods you can use depending on your preference. Here are the most common and recommended ways:
Method 1: Using Hardware Keys
* Turn off the device by pressing and holding the power button for 10 seconds.
* Press and hold the power button and the volume up button simultaneously for 10 seconds until the device enters recovery mode.
* In recovery mode, select "Wipe data/factory reset" using the volume buttons and the power button as the confirm button.
* Confirm the reset by selecting "Yes-delete all user data" and press the power button.
* Wait for the device to reset and reboot.
Method 2: Using ADB and Fastboot
* Connect the device to your computer using a USB cable.
* Install the latest version of Android SDK on your computer.
* Open a command prompt and navigate to the directory where ADB and Fastboot are installed.
* Enable USB debugging on your device by going to Settings > Developer options > USB debugging and toggle it on.
* Reboot your device into recovery mode by pressing and holding the power button and the volume up button simultaneously until the device enters recovery mode.
* In recovery mode, select "Allow USB debugging" and connect your device to your computer.
* On your computer, enter the following command to enter fastboot mode: fastboot reboot recovery
* In recovery mode, select "Wipe data/factory reset" using the volume buttons and the power button as the confirm button.
* Confirm the reset by selecting "Yes-delete all user data" and press the power button.
* Wait for the device to reset and reboot.
Method 3: Using SpiceSafe and SpiceHub
* Make sure you have SpiceSafe and SpiceHub installed on your computer.
* Connect your device to your computer using a USB cable.
* Open SpiceSafe and sign in with your Spice account.
* Select your device from the list and click on "Backup".
* Select "Clear default data/factory reset" and click on "Backup now".
* Wait for the backup process to complete.
* Disconnect your device from your computer.
* Reboot your device into recovery mode by pressing and holding the power button and the volume up button simultaneously until the device enters recovery mode.
* In recovery mode, select "Restore from backup" using the volume buttons and the power button as the confirm button.
* Select the backup file you created earlier and press the power button.
* Wait for the device to restore and reboot.
Note: these methods should only be used if you have a backup of your data or if you are willing to lose all your data on the device. It is important to follow these steps carefully to avoid any data loss or damage to your device.
