How to reset or factory restore Sharp TM100 device?
The most common and recommended ways to reset or factory restore a Sharp TM100 device are:
1. Using the reset button:
To reset the device to its factory settings using the reset button, follow these steps:
a. Press and hold the reset button for 10 seconds until the device switches to recovery mode.
b. Once in recovery mode, select "Yes - data will be erased" and press the reset button.
c. The device will begin to reset and the reset progress will be displayed on the screen.
d. The device will reboot once the reset is complete, and you will be prompted to set up your device as a new device.
Note: Using the reset button will delete all data on the device, so make sure to back up important data before performing a reset.
2. Using PC Link:
To reset the device to its factory settings using PC Link, follow these steps:
a. Connect your Sharp TM100 device to your computer using a USB cable.
b. Open the Sharp TM100 device manager on your computer.
c. Under "Ports and Controllers" or "COM Ports", locate the device and select it.
d. Right-click on the device and select "Properties".
e. In the device properties menu, select "Advanced Device Setup".
f. In the advanced device setup menu, check "Hardware reset" and click "OK".
g. The device will begin to reset and the reset progress will be displayed on the screen.
h. The device will reboot once the reset is complete, and you will be prompted to set up your device as a new device.
Note: Using PC Link to reset the device will require a computer with a compatible USB port and Sharp TM100 cache drivers installed.
It is important to note that resetting the device or factory restoring the device will delete all data, settings, and applications installed on the device. Make sure to back up important data before performing a reset or factory restore.
